 |
| |
Specifications: groups of plastic / bottle:
1 0 ml
2 0 ml
100 ml
250 ml
Advantage: Application:
Glass and metal, special glass coffee table, glass products, Crystal
Handicrafts, household products, lighting and ceramics, such as bonding
1, the bond must be completely clean dry surface, can not have oil or dust, to avoid affecting performance bond
2, bonding, in a modest infusion glue, the bond will face pinched and exclude air bubbles
3, irradiated with ultraviolet light around 5-10 seconds clear positioning in excess glue, five minutes of complete cure; within two minutes of high pressure Shui Yindeng completely cured
4, no contact with the UV light, may at any time, fixed position
5, (UV) radiation wavelength ultraviolet light: 100 nm ~ 420nm
6, the use of products Kaifeng, to be locking caps, and home with a cool dry place and avoid too much exposure to direct sunlight
7, a micro-irritating to the skin, the skin if touched to clean
8, the use of temperature: -40 ℃ ~ +150 ℃
9, the use of products Kaifeng, Jinsuo caps to be home with a cool dry place and avoid too much exposure to direct sunlight
10, durability period: 12 months, measured by the test to confirm qualified to continue
Product Description
Performance characteristics:
Appearance: transparent liquid
Viscosity / mPa.s 900 ~ 2000 application temperature range / ℃: -30 ~ +150
Density (25 ℃) / g.ml-l: 1.05
Hardness / Shao D: 55
Tensile strength / MPa: 70
Elongation at break /%: 120
Shear strength / MPa (glass / Al): 25
High-intensity, low odor, non-toxic, dry cured surface.
Location and curing properties:
Positioning time (S) 5 ~ 20 4 ~ 5
Curing time (S) 60 ~ 80 30 ~ 60
|
|
|
 |
| |
| Advantages︰ |
40W double-ultraviolet lamps
1, irradiated with ultraviolet light UV plastic .5-10 second location .5 minutes of the fully cured, as other
That can also be allocated Philips sterilization of light
2, ultraviolet light wavelengths :100-400 nm
3, voltage: 220 V
4, power: 40 W
20W single ultraviolet lamps
1, ultraviolet light exposure to UV plastic .5-10 second location .5 minutes of the fully cured, the other can also use lighting
2, ultraviolet light wavelengths :365-400 nm
3, voltage: 220 V
4, power: 20 W
20W Philips single-tube ultraviolet light: You can also allocated 40 W Philips Lamp
125W) Wu Yingdeng
Specifications: 125W Philips high-pressure mercury lamp (with aluminum enclosures, power supply and wire)
1, used for lighting UV plastic 5-10 second location, five minutes of the fully cured
2,125 W Philips high-pressure mercury lamp, 40 mW/cm2 mercury lamp irradiation
3, contrast: <1 second.
4, resisting Zhenlv: ≤ 0.01%
5, false identification rate: ≤ 0.0001%
6, voltage: 220 V/50HZ
7, Power: 125 W
300W.OSRAM OSRAM ultraviolet light bulb
The original bulb for the German import, OSRAM OSRAM ultraviolet light bulbs, its reliable quality, the use of TING
Long life. Applicable to the ultraviolet curing, material detection. Was designated as special UV-resistant yellowing bulb.
OSRAM OSRAM: ULTRA-VITALUX 300W 230V, E27 thread lamp holder, without any
Ballast, life expectancy 1000 hours, the curing time 10-50 seconds. Is currently the world's most inexpensive and convenient curing light bulb.
Voltage: 220 V/50HZ
Power: 300 W
|
|
|
|
|
|
|
